MicroCure DTO-LF is a hydrophobic and oleophobic conformal coating. MicroCure has excellent resistance to water-vapor, moisture, solvents, and abrasion. MicroCure can be applied by dipping and spraying. When well-cured, contact angles to water greater than 100° and roll-off angles of less than 10° can be achieved. MicroCure is omniphobic. MicroCure forms a hard shell around devices that prevents water, water-vapor, and pollutant ingress and prevents corrosion. Microcure is UV-light resistant and lasts 3 to 5 years in extreme sunlight.
Size: 125 ml
Application method: Wipe, brush, spray, or dip. To brush-on or wipe-on a thin layer, 10 drops of MicroCure can be applied to the end of a brush and applied onto the substrate in a crosshatch pattern. About 50-100 square feet of surface area can be coated with 125 ml of MicroCure.
Curing: Room temperature 5 hours (or heat with hair dryer for 5 minutes)
Color: Transparent
Water contact angle: over 105°
Ethanol and IPA resistance: Excellent
NaOH resistant: Yes (25% NaOH for 1 hour)
